Did you ever get out to buy a sturdy can-do-all jacket and felt lost when you were wandering around in the wilderness of nylon and polyester in your local outdoor shop?
Understanding some key terms and the basics of rain jacket technology will help you navigate to the jacket that keeps you dry - and the one that fits your budget.
When it comes to price, you’re paying for all of the research, development, testing - and ultimately the performance - of the fabric in that jacket. Top-tier rain jacket can cost several hundred dollars, so some pre-purchase research is a savvy move.
Types of Weather Protection
Any jacket offers some level of water resistance. Understanding terminology will help you determine what degree of protection a specific jacket has.
Waterproof vs. water-resistant
We call a jacket “waterproof” when its water resistance is sufficient to keep out driving rain. Though companies disagree on test standards, you can trust that any gear that a major brand designates as “waterproof” can stand up to a serious squall.
Waterproof/breathable: This type of performance rain jacket keeps rain from getting through to your skin, while also moving sweat back through to the outside world. If you’re planning any activity that gets limbs and lungs pumping, this is your kind of gear because both precipitation and perspiration can soak you.
Water-resistant: Also breathable, this is gear that can handle light rain for a brief time - windbreakers and featherweight jackets, for example. If precipitation lingers or starts coming down sideways, these won’t be up to the task.
Waterproof/nonbreathable: Think rain slicker or emergency poncho. If you simply need to keep the rain out while sitting or standing around, this gear does just fine - and costs very little money. If you do any exertion, though, your rain slicker will be slick inside, too. And it won’t take much wind to make a poncho largely ineffective.
Windproof vs. wind-resistant
Just as “water-resistant” relates to “waterproof,” “wind-resistant” becomes “windproof” when test results exceed an established threshold.
Windproof: Any waterproof jacket is also windproof. That makes sense when you consider that a barrier designed to block driving rain would also block the wind that’s pushing the rain. You will also find jackets with windproof technology, typically some type of laminate, that are only considered water-resistant.
Wind-resistant: Essentially the same as a water-resistant jacket, this is often an ultralight garment that easily stuffs into a pocket. Made for short trips and optimistic forecasts, it won’t offer much protection in a full-fledged storm.
3-in-1 Jackets
A step beyond rain jacket, this design combines a rain jacket with a fleece jacket or an insulated shell. The inner component typically zips into the rain jacket, offering you the option of wearing either piece on its own.
Types of Weather Shells
Though often used interchangeably with the word “jacket,” “shell” can also refer to pants, parkas and ponchos. It’s a word that focuses on the fabric makeup more than the garment style. Becoming familiar with the following types of shells will help as you consider your weather-protection choices.
Hard shell: This is an alternative term for waterproof/breathable gear. As you might imagine, fabrics in most hard shells are generally stiffer than those in soft shells, though more supple hard-shell fabrics are being developed. Hard shells aren’t insulated, so your warmth will come from an underlying base layer and midlayer.
Soft shell: The classic version integrates an insulating layer with a water-resistant shell. The goal is to have a single piece serving as both midlayer and outer layer. The tradeoff is greater breathability for lesser protection from rain, wind and cold. Soft shells are best for high-exertion activities, where perspiration is the greater concern.
Evolving designs make the soft-shell category a little fuzzy. Many soft shells also have excellent flexibility, a feature that’s somewhat rare in a hard shell.
Hybrid shell: This term gets applied to a variety of constructions. In a soft/hard-shell combo, more waterproof and windproof fabrics might be on the front and top, while more breathable, flexible fabric is on the sides, back and underneath sleeves. Or you might find a traditional soft or hard shell with a more durable fabric on its outer face or in high-wear areas.
Insulated shell: Typically filled with down or synthetic fill for warmth, most puffy jackets are also water-resistant and breathable. If the jacket has a waterproof/breathable fabric, then you enjoy an elevated level of protection. It has to be seam-sealed, though, to be considered fully waterproof.
What Breathability Means
Breathability in waterproof/breathable rain jacket is the game changer. No one wants to play outside in a wearable sauna. The key to avoiding that fate is “moisture vapor transfer,” which, scientific purists will tell you, is what we’re really talking about when we say “breathability.”
Transferring sweat vapor through a shell happens in part because the warm, moist air inside is attracted to colder, relatively drier air outside. The efficiency of that vapor transfer process helps determine how dry or clammy you feel, and improving that efficiency has been the focus of outdoor brands for decades. You’ll hear all sorts of competing claims about performance, which really just means that Gore-Tex® rain jacket is not your only option anymore.
Today’s jackets do indeed breathe much better than their predecessors, though we have no universal test standard, nor independent certification body, that measures breathability performance.
Some brands are also including a low level of “air permeability,” the scientific term for classic breathability. They market this approach using different terminology, but generally tout better or faster breathability. The tradeoff is that a more direct air exchange also lets out warm air. So these jackets require a warmer insulating layer than you would wear under a traditional waterproof/breathable shell.
Waterproof/Breathable Technologies
The key component of your rain jacket fabric is a coating or membrane that does the technological trick of blocking rain while also allowing sweat vapor to escape. Because it’s relatively delicate, a membrane will be bonded to a protective fabric to create a laminate.
Almost all rain jacket is made using either a laminate or a coating, though the exact materials in each will vary.
Laminates vs. Coatings
The following chart offers key details about the makeup of each. It also provides widely accepted assessments about performance, weight and price, though some products will be exceptions to these guidelines.
Durable water repellent (DWR)
Most outerwear, including all waterproof/breathable rain jacket, has an added durable water-repellent (DWR) finish. When a jacket’s outer fabric is “water-repellent,” precipitation literally beads up and rolls off. Note that this isn’t the same as a fabric being “water-resistant,” which is an overall assessment of its ability to prevent water penetration.
Often overlooked after purchase, maintenance of the DWR finish is critical if you want your high-tech jacket to keep working its magic. When the DWR wears off, a jacket’s surface fabric can get wet. The underlying membrane or coating will still keep water out, but the soaked surface fabric slows the movement of sweat vapor to the outside. The clammy lining might even cling to your skin, making it feel as though the jacket is leaking.
Interestingly, the more environmentally friendly DWR finishes used today wear out more quickly than older DWR products. Thus, regularly reapplying a DWR treatment should be part of your rain jacket maintenance routine. When rain stops beading up or when a wet surface fabric gives you cold spots, it’s time to reapply.
Rainwear Layers
For protection, a jacket’s membrane or coating is sandwiched inside additional layers. An outer layer stands up to abrasion and repels rain, while an inner layer protects against both body oils and wear-and-tear from the inside of the jacket.
The three types of construction used in rain jacket are a 2-layer, 2.5-layer and 3-layer design. Here is a brief primer:
2-Layer: The Quietest
The membrane or coating layer is applied inside an outer fabric layer to form a single piece of material. A loose-hanging liner is added inside that to protect the membrane or coating. Because it's quieter (less “swishy” as you walk), 2-layer construction is favored for urban and travel rain jacket. Regardless of intended use, this design is found in moderately priced jackets.
2.5-Layer: The Lightest
This is where the term “layer” can be confusing. Like 2-layer and 3-layer constructions, this design uses a lightweight yet durable outer fabric as its first layer. The second “layer” is actually a polyurethane laminate or coating applied inside that first layer. Finally, a protective sheen or print (a “half layer”) is laid down over that second layer.
While 2.5-layer designs don’t typically match the breathability or durability of other approaches, a jacket made this way is usually lighter and more affordable. Some wearers think 2.5-layer jackets feel clammy, though “dry-touch” prints are changing that perception.
3-Layer: The Most Robust
No coatings are used here, just a membrane tightly sandwiched between a rugged face fabric and a liner. Generally, the most durable and breathable construction, 3-layer designs are used in rain jacket intended for the harshest backcountry environments. These jackets will also command a premium price.
The following chart provides rough assessments about performance, weight and price, though some products will be exceptions to these guidelines.
While the technology in the fabric is the biggest factor in the cost of rain jacket, construction details also play a role. Jackets with a robust feature set will reflect that in their price. Weight is also affected, so you might see a jacket with a top-tier fabric but few extra features, especially pockets, if ultralight design is the goal.
Seam taping
Because construction requires so many seams, a true rain jacket must be fully seam taped in order for it to be fully waterproof. Since all waterproof jackets are made this way, so you don’t have to consider seam taping as part of your buying decision.
Don't assume a jacket is fully waterproof based solely on finding seam tape in the hood and shoulders, though: it's a common practice on merely water-resistant jackets. Also, don't assume lack of seam taping indicates poor quality in a soft-shell or other water-resistant jacket: seam taping isn't used because it would simply add complexity that's not required for the intended use.
Zippers
From the front opening to pockets to pit zips, most jackets are loaded with zippers. Keeping water from seeping through zippers requires a rubberized coating or a storm flap. Coated zippers, also called laminated zippers, are harder to zip up and down. They also need a cover, often called a zipper hut or zipper garage, to shield the tiny opening at the end of the zipper track. The trend is away from full flaps in order to save weight, though coatings will eventually wear down and be less effective.
Hood design
Most hoods have brims and adjustments on the sides and in back in order to fine-tune the size of the opening. Jackets without those adjustments are intended for more casual uses. Some jackets also have hoods that zip off or roll and stow in the collar.
Vents
Because even the most breathable rain jacket can get overwhelmed during strenuous activity, almost all backcountry rain jacket has pit zips (underarm vents). Some jackets go a step further, having mesh liners in torso pockets that can double as additional vents.
Adjustment features
In addition to the hood adjusters noted above, jackets often have a drawcord at the bottom hem. Longer jackets might have a drawcord at the waist. Most technical rain jackets will have wrist closures that adjust. All of these adjustments let you create tight closures to keep rain, wind and cold from sneaking into the openings of your jacket. The adjustments can also be loosened to increase overall jacket ventilation.
Pockets
Pockets, especially if they have waterproof zippers, will add to the price of a jacket. Some jackets have so many pockets that you might be tempted to forgo your pack. Other jackets have hand pockets placed above the hipbelt and away from the shoulder straps, so that you can access them while your pack is on.
Many jackets now include a pocket with a cord port that lets you listen to your phone or music player. And travel jackets sometimes hide pockets under storm flaps or along seams, where pickpockets are less likely to find them.
Packability
Ultralight, non-bulky fabric always makes a jacket easier to pack. A few jackets go further, designing a pocket to double as a storage pouch. If a jacket has this feature, or comes with its own stuff sack, it is designated as “packable”.
Personally, I always roll my jacket up towards the hood and fold the hood over the rolled up jacket. Works perfect and it fits easier in your backpack.
Side Notes:
We tested many jackets over the years when hiking through valleys and climbing mountains. Different locations might request different materials. You might rip your 2 layer jacket when you go rock climbing, a 3 layer jacket would be a better fit for this activity because it is more sturdy. We have different jackets depending on the activity.
Carrying a heavy backpack while encountering heavy rain for hours might lead to leakage in the area that supports the shoulder straps of the backpack. We had this issue with a few Gore-Tex approved jackets. The pressure and friction pushed the water drops through the breathable fabric and eventually soaked our T-shirt. We aren't really favoring poncho's, but if you go hiking in a rainy area, it might be useful to get a large poncho that also covers your backpack.
Comments